Barlinek Engineered Wooden Floor - Oak 1 strip Cappuccino 14mm - 0.84m²

• Product Description: This product comprises three layers: a surface layer of oak, and middle and bottom layers of pine. The top layer features one row of strips in various grades.
• Finish Surface Layer: Protected by 5 layers of acrylic matt lacquer UV hardened, including 3 layers of primer lacquer and 2 layers of UV-hardened surface ceramic lacquer.
• Connection System Boards: Each package includes assembly instructions for the Cross Edge - Barclick system and transverse lock insert made of HDF.

Characteristics of the Surface Layer:

• Surface Appearance: Exhibits yellow-brown oak wood with natural features, characterized by grain variability and varied colors. It darkens under UV rays and features a four-sided microbevelled top layer structured by brushing.
• Colour: Cream.
• Hardness: The oak top layer tested according to EN 13489 standards, with an average hardness of 37 MPa.

Dimensions of an Individual Element:

• Thickness: 14mm
• Length: 1092mm (+/- 0.1%)
• Width: 110mm (+/- 0.2mm)

Thicknesses Board Measured According to EN 13647:

• Surface Layer: 2.5mm
• Middle and Bottom Layer: 11.5mm

Package:

• Number of Boards in a Pack: 7 pieces of 1092mm length, or 6 pieces of 1092mm length and 1 piece of 1064mm length
• Pack Coverage: 0.84m²/pack, 64 packs/pallet = 53.76m²

Characteristics/Installation Instructions/Warranty:

• Humidity Board: 7% +/- 2%
• Installation: Suitable for use with electric and water floor heating systems.
• Warranty: 20 years residential, 5 years commercial.

Description of Surface Layer:

• Classification: Free class according to EN 13489, Various class according to Barlinek.
• Characteristics: Includes healthy knots without limit, unhealthy knots with fillings up to 55mm in diameter, and unhealthy holes from knots up to 25mm in diameter. Bark pockets, varied colour scheme, varied arrangements of fibers, silver grains, and sapwood are acceptable. Filling cracks are acceptable up to 6mm wide and 200mm long. Biodegradation of the surface layer is unacceptable.

Recommended Frequency of Floor Maintenance:

• Protektor Concentrate: For everyday cleaning, yielding approximately 500m²/1L.
• Protektor Complete: For periodic cleaning, yielding approximately 200m²/L.
• Protektor Shine: For periodic regeneration, yielding approximately 100m²/L. Always use Protektor Complete before applying Protektor Shine. Avoid excess in crevices of brushed and bevelled floorboards.

Attention: Use only agents intended for lacquered floors. Sand and water spills should be promptly removed. Regular cleaning and maintenance delay the need for thorough cleaning with Protektor Shine.